750W Air Shower Pass Box Embedded Lamps With Arc Design GMP Standard

Embedded Lamps with Arc Design in Air-shower Transfer Window of New GMP Standard

Introduction

The air shower pass box is designed according to the type of the clean room air shower . And it is also called purification transfer box, air-shower transfer cabinet or air-shower pass box. In order to reduce the large amount of dust particles caused by goods entering and leaving ,the fan quickly blows the air out through the Initial and High Efficiency Filters and turns it into clean air. The clean air is sprayed by stainless steel nozzle, and the airflow velocity is over 20m/s. It is possible to remove the dust particles attached to the surface of the object quickly and effectively.

Characteristics

1. Adopt a circular corner that is more suitable for the clean room principle.

2. The outer wall is sprayed with high quality cold rolled steel plate.

3. Stainless steel plate is used on the working table of short distance pass box , which is smooth, and wear-resistant.

4. The working table of long-distance pass box is equipped with powerless drum, which makes the delivery of goods easy and convenient.

5. Both side doors are equipped with mechanical or electronic interlocking devices to ensure that both side doors cannot be opened at the same time.

6.The air velocity of the tuyere outlet is over 20 m/s.

7.High efficiency filter with partition is adopted, the filtration efficiency is 99.99%, ensuring the purification level.

8.Using EVA sealing material, high sealing performance.

9. Imported electronic components, reliable performance.

Interlock Working principle

1.Mechanical interlocking device: Interlocking is achieved by mechanical means in the interior. When one door opens, the other door cannot be opened. The other door must be closed before the other door can be opened.

2.Electronic interlocking device: the internal use of integrated circuits, electromagnetic locks, control panels, indicator lights to achieve interlocking, when one door opens, the other one does not turn on, telling the door can not be opened, while the electromagnetic lock action to achieve interlocking. When the door closes, the electromagnetic lock of the other door starts to work, and the indicator lights up, indicating that the other door can be opened.

Matters needing attention

 1.Wind-shower transfer window is suitable for transportation by general means of transportation. During transportation, rain and snow should be          prevented to avoid damage and rust

 2.The air shower transfer window should be stored in a warehouse with temperature of - 10 ~40 ~C, relative humidity of not more than 80%, and no    corrosive gases such as acid and alkali.

 3.When opening a box, it should be civilized and not rude or barbaric, so as to avoid causing personal injury.

 4.After unpacking, please confirm whether the product is the specified product. Then check the contents of the packing list carefully whether there  are any missing parts and whether the parts are damaged by transportation

Products Parameter:

Customer's design is available.

Structural sketch

Our factory