KeLing Purification Technology Company Limited
Advanced. High-Qulity. Reasonable.
Payment & Shipping Terms:
|Name:||Ceiling And Wall HEPA Filter Units||Material:||Cold-rolled Plate|
hepa filter unit,
duct filter box
Cleanroom Professional Ceiling And Wall Laminar Flow Terminal HEPA Filters
CUSTOMIZED DESIGN IS AVAILABLE
Ceiling Hepa filter units are used in air supply or extraction applications
in air conditioning and ventilation installations in rooms requiring the
highest standards of air purity. Hepa filters of E10 to H14 class prevent the
intake of particles larger than 0.3 μm. For initial pressure loss see filter HEPAFILTER.
Filter housings for filter thickness between 60 and 80 mm, delivered without filter.
1. Unique curved face design is pleasing to the eye.
No unsightly sharp angles.
2. Engineered design and performance are the result
of extensive laboratory design and testing.
Standard DG model has a true 180° radial air pattern.
Model DG has a 90° radial pattern for perimeter
3. The face of the diffuser is attached to the plenum
with two stainless steel hinges. The opposite side
is secured with 1/4 turn fasteners.
4.Easy filter change and cleaning through the
openable diffuser panel
5.Low unit height
6. Fixing brackets for easy installation of the product
7.Sizes 595 and 670 adapted for installation in
modular suspended ceilings
8.HEPA filters H11 and H14 available as standard
9. Powder coated finishing, standard colour RAL9010
10. Filters should be ordered separately.
Ceiling HEPA filter units AFV-8 are used in supply or extract air
applications in air conditioning and ventilating installations of the
rooms with highest demands regarding air cleanness. They can
be installed as follows:
a. Air supply and extract in laboratories,
b. Air supply and extract in operating rooms, infection- and sterile
|Model||Install size||Filter size||Flange size||Air flow|
|Tube on top/side||(BXAXH)mm||(H13)||(mm)||M3/h|
Customized design is available.
A: Document for custom clear: 1 sets
B: Assemble draw: 1 pcs
C: Circuit diagram draw: 1 pcs
D: Test report : 1sets
E: Additional IQ/OQ/PQ document is available upon request.
2: the follow spare part so that you can replacement in future by yourself:
A: HEPA air filter +Pre-filter (as your request)
Note: HEPA air filter should be replacement in half and one year. Pre-filter
should be replacement in each 6 months, but it can refresh no more than 3 times
B: Sensor (As your request)
C: Control board (as your request)
3: The Dynamic Pass box guarantee time is 2 years excluding consumable parts and accessories .
Contact Person: Mrs. Zhao
Tel: 86 20 13378693703