KeLing Purification Technology Company Limited
Advanced. High-Qulity. Reasonable.
Payment & Shipping Terms:
|Dimensions:||3000*684*130 Mm||Cleaning Size:||1825*510 Mm|
|Drying Size:||860*560 Mm||Water Inlet Temperature:||0-40℃|
|Switching Mode:||Infrared Induction||Pump Power:||45 W|
Sole cleaning machine, also known as clean room sole cleaning machine, automatic sole cleaning machine, etc., the equipment is placed in the dust-free workshop, the purification studio entrance or the purification work area air shower room, the staff wear flat-bottom dust-free shoes ( Anti-static shoes), step into and step on the cleaning belt on the machine.The belt of the machine is moved backwards to clean the sole of the shoe.Then, step on the strong absorbent cotton, drain the water drops from the soles during the cleaning process, and finally enter the air shower or workshop. It can cut off the important dust pollution source in the dust-free workshop and improve the cleanliness of the whole workshop.
1.Solve and improve the cleanliness of clean rooms and office areas in the clean room from the source;
2. The machine is fully automatic and intelligent, saving manpower;
3. Cancel the use of sticky mats and shoe covers, and be an environmentally friendly green enterprise, saving business-related costs.
1. The whole machine is highly automated, with photosensitive sensor control, and automatically stops after cleaning;
2. Short cleaning time and high efficiency, only 3 seconds;
3. The amount of consumables is small, the cost of use is low, and only clean tap water is needed on weekdays;
4.Fully automatic model, only need to directly access the tap water pipe, the drain end is connected to the water passage, recycling, automatic timed drainage, and more cost-saving;
5.Cleaner cleaning belt is durable and has a long service life
6.Safe use of the machine, water and electricity separation does not leak, water level alarm, you can also choose to install handrails, guide channels, safer.
Dimensions: 3000*684*130 mm
Cleaning size: 1825*510 mm
Drying size: 860*560 mm
Absorbent pad material: PVA/ PU sponge
Inlet water temperature: 0-40 ℃
Water tank capacity: 45L
Drainage method: automatic / manual
Motor Power: 200W
Pump power: 45W
Pump voltage: 24V
Working current: 1.5A
Safety protection: overload / leakage protection
Motion noise : <62 dB
Body material: SUS304
Maximum load: 400 kg
Equipment weight: 170KG
Service life: 8 years
|Name||Service life||Maintenance cycle|
|Filter||5 years||Open the front cover of the device and take out the filter cleaning. It is recommended to clean it at least once a day.|
|brush||6-12 months||Clean up foreign objects on the brush once a day|
|Absorbent pad||6 months||Clean the absorbent pad once a day|
|Sprocket||24 months||Open the sprocket cover and apply grease. It is recommended once a month.|
Our products have good reputation in worldwide,the client spread all over European America and Southeast Asia.
Sincerely establish steady business relationship with you!