KeLing Purification Technology Company Limited
Advanced. High-Qulity. Reasonable.
Payment & Shipping Terms:
|Material:||Steel With Powder Coated/ SUS 304/ SUS216/ SUS201||Weight:||250KG|
|Voltage:||380 V||Power(W):||0.75 Kw|
|Application:||Clean Room Entrance||Warranty:||1 Year|
semiconductor clean room,
lab clean room
Customizable PLC Intelligent Control Clean Room Air Shower For Laboratory
The air shower is the necessary passage to enter the clean room, which can reduce the pollution problems caused by entering and leaving the clean room.
The air shower is a highly versatile partial purification device installed between the clean room and the non-clean room. When people and goods enter the clean area, they need to be blown through the air shower. The clean air blown out can remove the dust carried by people and goods, and can effectively block or reduce the dust source from entering the clean area. The front and rear doors of the air shower/ cargo shower are electronically interlocked and act as air locks to prevent unpurified air from entering the clean area.
|Model||KEL -AS-C1-1200||KEL - AS-C2-1200||KEL - AS-C3-1200|
( W * D * H ) mm
( W * D * H ) mm
|Personal per cycle||1 - 2 persons||2 - 4 persons||3 - 6 persons|
|Air Shower Duration||Factory set at 15 seconds ( adjustable )|
|Construction||Stainless Steel 304 / 201 or Steel With Power Coated|
|Fan Consumption||750W * 1set||750W * 2set||750W * 3set|
|Fan Air Flow||1300m3 / h|
|Fan Run||2800r / min|
|Wind Speed ( m / s )||22 - 27m / s|
|Noise Level||〈 65dB|
|LED||20W * 1||20W * 2||20W * 3|
|Efficiency||99.99 % @ 0.3ｕｍ|
|Pre - Filter||Size||785x385x2mm|
|Efficiency||75 % @ 5ｕｍ|
|Electrical||Power||380V / 50HZ|
|Quality guarantee||12 months|
Air Shower Display
Packing and shipping
As for packing, we use wooden cases to prevent damage.
Use strong wooden boxes to ensure the goods arrival the destination safely.
Every year our shipments are very large, but we will not delay delivery to our customers, and will ensure that the goods are packed tightly in the transport process.
Contact Person: Carol Li